BS-001
Button-Front Game Jerseys
The classic full-placket jersey, with a long body that stays tucked at the plate.
From $11.66/pc Quote: Button-Front Game Jerseys
Images are design mockups; your sample shows the finished garment.
Baseball BS-002
Custom Baseball Two-Button Placket Jerseys
Short two-button placket over a clean front that takes a full script.
Custom baseball two-button placket jerseys are made to order by Velofit International in Sialkot, Pakistan, from $11.66 to $19.36 per piece depending on quantity, with no minimum order. A sample is ready 10 days after artwork approval and production takes 2-3 weeks after you approve it. Orders ship free to the United States by tracked express with customs duty paid, usually arriving 4-7 business days after dispatch.
- Price
- From $11.66/pc
- Minimum order
- None
Last updated
USD per piece
How much do custom baseball two-button placket jerseys cost?
Six tiers from a single unit to a thousand. Orders above a thousand are quoted.
| 1–20 | 21–50 | 51–100 | 101–200 | 201–500 | 501–1,000 |
|---|---|---|---|---|---|
| $19.36/piece | $17.64/piece | $16.00/piece | $15.20/piece | $13.00/piece | $11.66/piece |
Prices in US dollars, reviewed .
Size chart
Custom Baseball Two-Button Placket Jerseys size chart
Choose a size from the body measurements. The garment measurements are the finished piece laid flat, so you can compare it with a top or short that already fits.
Body measurements
Regular US baseball cut with 16 cm chest ease over the body, set-in sleeves and a long tuck-in body that stays in the pant through a swing or a slide. Worn over an undershirt or base layer; full-button and two-button plackets share this body pattern.
| Size | Chest cmin | Height cmin |
|---|---|---|
| XS | 84–9033–35½ | 160–16863–66 |
| S | 90–9635½–38 | 165–17365–68 |
| M | 96–10438–41 | 170–17867–70 |
| L | 104–11241–44 | 175–18369–72 |
| XL | 112–12044–47 | 178–18670–73 |
| 2XL | 120–12847–50½ | 180–18871–74 |
| 3XL | 128–13650½–53½ | 180–19071–75 |
| 4XL | 136–14453½–56½ | 182–19271½–75½ |
| Size | Chest cmin | Height cmin |
|---|---|---|
| YXS | 58–6323–25 | 104–11741–46 |
| YS | 63–6825–27 | 117–13046–51 |
| YM | 68–7427–29 | 130–14251–56 |
| YL | 74–8129–32 | 142–15556–61 |
| YXL | 81–8732–34½ | 155–16561–65 |
How to measure
- Chest
- Over a thin T-shirt or bare skin, arms relaxed at the sides: pass the tape under both armpits and around the fullest part of the chest and the shoulder blades, level all the way round. Snug, not tight; one finger should slide under.
- Height
- Barefoot, back against a wall, heels touching it, looking straight ahead: mark the top of the head with a flat object and measure floor to mark.
- Size by chest. Between sizes, go up if the player wears a long-sleeve undershirt or wants room to swing; go down for a cleaner look.
- The body is cut long to stay tucked: back length is 8-10 cm longer than a training tee of the same size. Tall players can have extra length noted on the roster.
- The placket adds no width: a full-button and a two-button jersey of the same size measure the same.
- Youth sizes are a separate youth pattern; a youth XL and an adult S are close in chest but the adult body is about 4 cm longer.
Garment measurements
| Size | 1/2 chest cmin | Body length (HPS, back) cmin | Across shoulder cmin | Sleeve length (center back) cmin |
|---|---|---|---|---|
| XS | 51.520¼ | 7630 | 4216½ | 3915¼ |
| S | 54.521½ | 7830¾ | 4417¼ | 40.516 |
| M | 5822¾ | 8031½ | 4618 | 4216½ |
| L | 6224½ | 8232¼ | 48.519 | 43.517¼ |
| XL | 6626 | 8433 | 5120 | 4517¾ |
| 2XL | 7027½ | 8633¾ | 53.521 | 46.518¼ |
| 3XL | 7429¼ | 8734¼ | 5622 | 4819 |
| 4XL | 7830¾ | 8834¾ | 58.523 | 49.519½ |
| Size | 1/2 chest cmin | Body length (HPS, back) cmin | Across shoulder cmin | Sleeve length (center back) cmin |
|---|---|---|---|---|
| YXS | 3815 | 5622 | 3212½ | 2911½ |
| YS | 4116¼ | 6023½ | 3413½ | 3112¼ |
| YM | 43.517¼ | 6425¼ | 36.514¼ | 3313 |
| YL | 4718½ | 6826¾ | 3915¼ | 3513¾ |
| YXL | 5019¾ | 7228¼ | 41.516¼ | 3714½ |
How to measure
- 1/2 chest
- Lay the garment flat, front up, and measure straight across from side seam to side seam 2.5 cm below the armholes (pit to pit).
- Body length (HPS, back)
- From the high point of the shoulder (where the shoulder seam or raglan seam meets the collar) straight down the back to the hem.
- Across shoulder
- Lay flat, back up, and measure straight across from shoulder seam point to shoulder seam point.
- Sleeve length (center back)
- Center-back sleeve: from the center of the back neck seam, across the shoulder point (or along the raglan seam) and down the sleeve to the hem. Works for set-in and raglan sleeves alike.
Finished measurements of our standard pattern for this cut, within ±1.5 cm½ in. Your sample confirms the fit before the order is made, and we can cut to your own size chart instead.
About the custom baseball two-button placket jerseys
Custom two-button baseball jerseys sit between the full-button and the pullover. A short placket opens at the neck and closes with two buttons, then the front runs clean all the way to the hem.
That clean lower front is the practical advantage. A chest script or a large front number no longer has to break around a column of buttons, and sublimated patterns run across the body without interruption. The jersey also goes on over the head, which some players prefer to buttoning up in a crowded dugout.
Because only the placket changes, a two-button jersey can share its body pattern with a full-button home jersey (BS-001). A program can then switch styles between home and road and keep the same fit on every player. Pair it with any pant cut in the catalog and the matching stirrup socks (BS-023), with sizes for jersey and pant listed separately on your roster. Some programs choose it for youth teams, where a pullover is quicker to dress in than a full row of buttons. If you want no placket at all, the crew-neck jersey (BS-004) keeps the same open front. Your mockup can show both placket styles side by side if you are still deciding.
What goes into it
- Two-button placket that opens at the neck only
- Unbroken lower front for a script, crest or front number
- Can share a body pattern with the full-button jersey
- Sublimated color, piping and sleeve detail
- Stitched or printed numbers on the back
Specification
- Fabric
- Micro polyester interlock or bird-eye mesh, both 100% polyester
- Neck
- Placket closing with two buttons
- Decoration
- Sublimated body; script and numbers stitched or printed
- Sold as
- Per piece
Questions about the custom baseball two-button placket jerseys
Is a two-button jersey easier to decorate than a full-button?
On the front, yes. Below the second button there is no placket, so a script or number sits in one piece and an all-over sublimated pattern is not cut in half.
Is there room for a front number?
Yes. The open lower front leaves space for a number beside or below the script. If your league sets its size or position, send that page of the rulebook with the order.
Other jerseys for game day for baseball teams
BS-003
V-Neck Game Jerseys
Pullover V-neck with no buttons and a collar in your second color.
From $11.66/pc Quote: V-Neck Game Jerseys
BS-004
Crew-Neck Game Jerseys
Round-neck pullover with raglan sleeves and the whole front free for a script.
From $11.66/pc Quote: Crew-Neck Game Jerseys
BS-010
Tank Game Jerseys
Sleeveless jersey for doubleheaders in the summer heat.
From $10.19/pc Quote: Tank Game Jerseys
Request a quote
Price your custom baseball two-button placket jerseys.
The product is filled in below. Add the quantity, sizes and deadline, and any artwork you have.
- You send the briefGarments, quantities and a deadline. A roster with names, numbers and sizes helps.
- We price it and prepare the artworkNames and numbers are checked against the rules you play under.
- A sample in 10 daysCounted from approved artwork, with a size set if you want to test the fit.
- Production in 2-3 weeksCounted from the day you approve the sample.
- Free express deliveryTracked to the United States, usually 4-7 business days after dispatch, duty paid.
Rather talk it through? Message us on WhatsApp